| Part Number : 16578 | Manufacturer : Gdi Simulation | ||
| NSN : 5905-01-035-7543 (5905010357543) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : F2181 | ||
| NIIN : 01-035-7543 (010357543) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 16578, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Gdi Simulation and listed alongside the NSN 5905010357543, part number 16578 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 16578 | Manufacturer : Gdi Simulation | ||
| NSN Number : 5905-01-035-7543 (5905010357543) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : F2181 | ||
| NIIN : 010357543 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 16578, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Gdi Simulation and listed alongside the NSN 5905010357543, part number 16578 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-035-7543 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 010357543 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 16578 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.495 NOMINAL MILS AND 0.505 NOMINAL CENTIMETERS |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 12.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 12.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AEFY | SHAFT END PLAY | 0.006 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | 0.060 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 150.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/5.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
