Part Number : 136856-01 | Manufacturer : Ge Aviation Systems Ltd | ||
NSN : 6615-00-053-4977 (6615000534977) | |||
Item Name : Retainer Cable | CAGE Code : 35351 | ||
NIIN : 00-053-4977 (000534977) | |||
FSC Code : 6615 Automatic Pilot Mechanisms and Airborne Gyro Components | |||
FSG Code : 66 Instruments and Laboratory Equipment | |||
INC Code : 77777 | |||
NCB Code : 00 | Country : USA | ||
Alternate P/N: 13685601 |
Thank you for taking an interest in part number 136856-01, that of which is listed with the description Retainer Cable; Manufactured by Ge Aviation Systems Ltd and listed alongside the NSN 6615000534977, part number 136856-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 136856-01 | Manufacturer : Ge Aviation Systems Ltd | ||
NSN Number : 6615-00-053-4977 (6615000534977) | |||
Item Name : Retainer Cable | CAGE Code : 35351 | ||
NIIN : 000534977 | |||
FSC CODE : 6615 Automatic Pilot Mechanisms and Airborne Gyro Components |
Thank you for taking an interest in part number 136856-01, that of which is listed with the description Retainer Cable; Manufactured by Ge Aviation Systems Ltd and listed alongside the NSN 6615000534977, part number 136856-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
TEXT | General Characteristics Item Description | MATL 24 GA 1.02591.0219 CR STEEL PER GG-S-636 COND 4 OR 5; FIN. BLACK OXIDE PER AMS 2485; 4.170 IN. LG; 0.594IN. W; 0.625 IN. H; ANGLE LOCATED ON EACH END 0.562 IN.; DIA OF HOLE CENTERED IN EACH ANGLE 0.125 IN; D1M. APPLY AFTER PLATING AND HEAT TREATING |
MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote