Part Number : 139212-01 | Manufacturer : Ge Aviation Systems Ltd | ||
NSN : 6615-00-055-3974 (6615000553974) | |||
Item Name : Plate Center | CAGE Code : 35351 | ||
NIIN : 00-055-3974 (000553974) | |||
FSC Code : 6615 Automatic Pilot Mechanisms and Airborne Gyro Components | |||
FSG Code : 66 Instruments and Laboratory Equipment | |||
INC Code : 77777 | |||
NCB Code : 00 | Country : USA | ||
Alternate P/N: 13921201 |
Thank you for taking an interest in part number 139212-01, that of which is listed with the description Plate Center; Manufactured by Ge Aviation Systems Ltd and listed alongside the NSN 6615000553974, part number 139212-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 139212-01 | Manufacturer : Ge Aviation Systems Ltd | ||
NSN Number : 6615-00-055-3974 (6615000553974) | |||
Item Name : Plate Center | CAGE Code : 35351 | ||
NIIN : 000553974 | |||
FSC CODE : 6615 Automatic Pilot Mechanisms and Airborne Gyro Components |
Thank you for taking an interest in part number 139212-01, that of which is listed with the description Plate Center; Manufactured by Ge Aviation Systems Ltd and listed alongside the NSN 6615000553974, part number 139212-01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
TEXT | General Characteristics Item Description | ALUMINUM ALLOY; SURFACE ROUGHNESS63 MICROINCHES; O/A DIM. 1.5 IN. L BY 1.164 IN. H W/ IRREGULARLY CUT CORNERS; HAS 1 GEAR SHAFT HOLE 0.5001/0.5006 IN. DIA; 3 GEAR SHAFT HOLES 0.1875/0.1878 IN. DIA; 2 GEAR SHAFT HOLES 0.2500/0.2503 IN. DIA; HAS 2 MTG HOLES |
MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote