| Part Number : MG1125E-2250-039 | Manufacturer : General Dynamics Global Imaging | ||
| NSN : 3010-01-416-4534 (3010014164534) | |||
| Item Name : Gearcase Motor | CAGE Code : 10112 | ||
| NIIN : 01-416-4534 (014164534) | |||
| FSC Code : 3010 Torque Converters and Speed Changers | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 01102 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: MG1125E2250039 | |||
Thank you for taking an interest in part number MG1125E-2250-039, that of which is listed with the description Gearcase Motor; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 3010014164534, part number MG1125E-2250-039 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MG1125E-2250-039 | Manufacturer : General Dynamics Global Imaging | ||
| NSN Number : 3010-01-416-4534 (3010014164534) | |||
| Item Name : Gearcase Motor | CAGE Code : 10112 | ||
| NIIN : 014164534 | |||
| FSC CODE : 3010 Torque Converters and Speed Changers | |||
Thank you for taking an interest in part number MG1125E-2250-039, that of which is listed with the description Gearcase Motor; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 3010014164534, part number MG1125E-2250-039 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-01-416-4534 Item PartTypeName: GEARCASE-MOTOR | 3010 | 014164534 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MG1125E-2250-039 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | III END ITEM IDENTIFICATION | 2350-01-328-5964 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| ACDC | CURRENT TYPE | DC INPUT DC OUTPUT |
| AAJT | OVERALL HEIGHT | 1.350 INCHES |
| AAJU | OVERALL LENGTH | 3.088 INCHES |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| AAJV | OVERALL WIDTH | 1.350 INCHES |
| BKPB | CURRENT RATING METHOD | LOCKED ROTOR AND NO LOAD |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.531 INCHES SINGLE END |
| CWDY | TEMP RATING | -55.0 OPERATING DEG FAHRENHEIT AND 100.0 OPERATING DEG FAHRENHEIT |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.062 INCHES |
| BKPH | TORQUE RATING AND TYPE | 150.0 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AXGY | MOUNTING METHOD | FACE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.062 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.062 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 13.0 LINE TO LINE SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 150.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 BINDING POST |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
