| Part Number : 62106 | Manufacturer : General Dynamics Global Imaging | ||
| NSN : 5905-00-177-7342 (5905001777342) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 10112 | ||
| NIIN : 00-177-7342 (001777342) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 62106, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905001777342, part number 62106 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 62106 | Manufacturer : General Dynamics Global Imaging | ||
| NSN Number : 5905-00-177-7342 (5905001777342) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 10112 | ||
| NIIN : 001777342 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 62106, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905001777342, part number 62106 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-177-7342 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 001777342 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 62106 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 1.87450 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.582 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.87500 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.07300 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.437 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.020 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.005 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.99750 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 18876-10179966 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
