1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

M17-10206-2 part number of General Dynamics Global Imaging - Order Now!

Part Number : M17-10206-2 Manufacturer : General Dynamics Global Imaging
NSN : 5905-00-446-1985 (5905004461985)
Item Name : Resistor Variable Wire Wound Pre CAGE Code : 10112
NIIN : 00-446-1985  (004461985)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37408
NCB Code : 00 Country : USA
Alternate P/N:  M17102062

Thank you for taking an interest in part number M17-10206-2, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905004461985, part number M17-10206-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
IN5196JTX
RFQ
L835028A0888
RFQ

M17-10206-2 part number of General Dynamics Global Imaging - Order Now!

Part Number : M17-10206-2 Manufacturer : General Dynamics Global Imaging
NSN Number : 5905-00-446-1985 (5905004461985)
Item Name : Resistor Variable Wire Wound Pre CAGE Code : 10112
NIIN : 004461985
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number M17-10206-2, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905004461985, part number M17-10206-2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number M17-10206-2

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number M17-10206-2 with NSN 5905-00-446-1985, 5905004461985

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-446-1985

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050044619850NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
8502223

Characteristics Data of NSN 5905-00-446-1985, 5905004461985

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.870 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0730 INCHES MINIMUM
ABPMBODY DIAMETER2.000 INCHES NOMINAL
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
ABXFSHAFT LENGTH1.125 INCHES NOMINAL
ADAQBODY LENGTH0.985 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.000 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER0.0600 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0930 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1.00 INCH-OUNCES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.30 TO 0.30 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION-0.025 TO 0.025 OHMS SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBWTAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS250000.0 SINGLE SECTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
TTQYTERMINAL TYPE AND QUANTITY4 TURRET

Frequently Asked Questions (FAQ): M17-10206-2 NSN Part

What Type of Item Is Part Number M17-10206-2?
  • Part Number M17-10206-2 is an "Resistor Variable Wire Wound Pre" manufactured by General Dynamics Global Imaging Managed with the NSN 5905-00-446-1985. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number M17-10206-2?
  • Resistor Variable Wire Wound Pre To receive a competitive quote for items with the part number M17-10206-2, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 10112 Important When Purchasing Part Number M17-10206-2?
  • CAGE Code 10112 signifies General Dynamics Global Imaging Managed as the manufacturer of Part Number M17-10206-2, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-446-1985 Paired with Part Number M17-10206-2?
  • Part Number M17-10206-2 is the identification assigned to the item by General Dynamics Global Imaging Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-446-1985 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up