1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

R2-10306-10 part number of General Dynamics Global Imaging - Order Now!

Part Number : R2-10306-10 Manufacturer : General Dynamics Global Imaging
NSN : 5905-00-787-8665 (5905007878665)
Item Name : Resistor Variable Nonwire Wound CAGE Code : 10112
NIIN : 00-787-8665  (007878665)
FSC Code : 5905 Resistors
FSG Code : 59 Electrical and Electronic Equipment Components
INC Code : 37405
NCB Code : 00 Country : USA
Alternate P/N:  R21030610

Thank you for taking an interest in part number R2-10306-10, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905007878665, part number R2-10306-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
4-40X5-32FTU-PH-SS-PS
RFQ
XT4HU3060HFF000XXX
Abb
RFQ

R2-10306-10 part number of General Dynamics Global Imaging - Order Now!

Part Number : R2-10306-10 Manufacturer : General Dynamics Global Imaging
NSN Number : 5905-00-787-8665 (5905007878665)
Item Name : Resistor Variable Nonwire Wound CAGE Code : 10112
NIIN : 007878665
FSC CODE : 5905 Resistors

Thank you for taking an interest in part number R2-10306-10, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5905007878665, part number R2-10306-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number R2-10306-10

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number R2-10306-10 with NSN 5905-00-787-8665, 5905007878665

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-787-8665

Item PartTypeName:

RESISTORVARIABLENONWIRE WOUND

59050078786650N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
300FTS-117225

Characteristics Data of NSN 5905-00-787-8665, 5905007878665

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
ABPAUNDERCUT DIAMETER2.87450 INCHES MINIMUM AND 2.87550 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
AEGCSHAFT RADIAL PLAY0.001 INCHES
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER2.87450 INCHES MINIMUM AND 2.87550 INCHES MAXIMUM
AAVMPILOT LENGTH0.04700 INCHES NOMINAL
ABHPOVERALL LENGTH3.422 INCHES MINIMUM AND 3.453 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.07500 INCHES MINIMUM AND 0.08500 INCHES MAXIMUM
ABPMBODY DIAMETER2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM
ABXFSHAFT LENGTH0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
ADAQBODY LENGTH2.688 INCHES MAXIMUM
ADAVOVERALL DIAMETER3.282 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER2.99500 INCHES MINIMUM AND 3.00500 INCHES MAXIMUM
AEDAMOUNTING LIP DEPTH0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE2.00 INCH-OUNCES
AEFZSHAFT RUNOUT0.001 INCHES
AEGALATERAL RUNOUT0.002 INCHES
AEGBPILOT DIAMETER RUNOUT0.00100 INCHES
APXHUNABLE TO DECODEUNABLE TO DECODE
AXGYMOUNTING METHODSERVO MOUNT
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION20.000 KILOHMS 2ND SECTION AND 50.000 KILOHMS 1ST SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
CQTMTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-300.0 TO 300.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 1ST SECTION AND-10.0 TO 10.0 2ND SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTION2ND SECTION 90 DEG SINE AND 1ST SECTION 90 DEG COSINE
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY7 TURRET

Frequently Asked Questions (FAQ): R2-10306-10 NSN Part

What Type of Item Is Part Number R2-10306-10?
  • Part Number R2-10306-10 is an "Resistor Variable Nonwire Wound" manufactured by General Dynamics Global Imaging Managed with the NSN 5905-00-787-8665. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number R2-10306-10?
  • Resistor Variable Nonwire Wound To receive a competitive quote for items with the part number R2-10306-10, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 10112 Important When Purchasing Part Number R2-10306-10?
  • CAGE Code 10112 signifies General Dynamics Global Imaging Managed as the manufacturer of Part Number R2-10306-10, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5905-00-787-8665 Paired with Part Number R2-10306-10?
  • Part Number R2-10306-10 is the identification assigned to the item by General Dynamics Global Imaging Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5905-00-787-8665 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up