| Part Number : 400492 | Manufacturer : General Dynamics Global Imaging | ||
| NSN : 5990-00-912-8850 (5990009128850) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 10112 | ||
| NIIN : 00-912-8850 (009128850) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 15289 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 400492, that of which is listed with the description Synchro Control Transformer; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5990009128850, part number 400492 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 400492 | Manufacturer : General Dynamics Global Imaging | ||
| NSN Number : 5990-00-912-8850 (5990009128850) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 10112 | ||
| NIIN : 009128850 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number 400492, that of which is listed with the description Synchro Control Transformer; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5990009128850, part number 400492 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-912-8850 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 009128850 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 400492 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.3090 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0750 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1830 INCHES MINIMUM AND 0.1850 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5300 INCHES MINIMUM AND 0.5500 INCHES MAXIMUM SINGLE SHAFT |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 24.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 7800.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 79.67 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 573.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 930.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.140 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.030 INCH-OUNCES NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7720 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.884 INCHES |
| CSJY | TRANSFORMATION RATIO | 0.720 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.186 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
