| Part Number : VTC18-26-6A | Manufacturer : General Dynamics Global Imaging | ||
| NSN : 5990-00-914-0854 (5990009140854) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 10112 | ||
| NIIN : 00-914-0854 (009140854) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 15289 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VTC18266A | |||
Thank you for taking an interest in part number VTC18-26-6A, that of which is listed with the description Synchro Control Transformer; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5990009140854, part number VTC18-26-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VTC18-26-6A | Manufacturer : General Dynamics Global Imaging | ||
| NSN Number : 5990-00-914-0854 (5990009140854) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 10112 | ||
| NIIN : 009140854 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number VTC18-26-6A, that of which is listed with the description Synchro Control Transformer; Manufactured by General Dynamics Global Imaging and listed alongside the NSN 5990009140854, part number VTC18-26-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-914-0854 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 009140854 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCT18-6N3 | 1 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0600 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.6250 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AJSL | BODY SIZE | 18 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 17.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 360.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 4600.00 MINIMUM AND 5800.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 70.00 MINIMUM AND 76.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 1600.00 MINIMUM AND 2050.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 14.50 MINIMUM AND 18.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 16.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 25.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.100 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5200 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2500 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/34 GOVERNMENT SPECIFICATION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
