| Part Number : S900060-18 | Manufacturer : General Dynamics Land Systems Inc | ||
| NSN : 5305-00-151-2919 (5305001512919) | |||
| Item Name : Screw Machine | CAGE Code : 05257 | ||
| NIIN : 00-151-2919 (001512919) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S90006018 | |||
Thank you for taking an interest in part number S900060-18, that of which is listed with the description Screw Machine; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5305001512919, part number S900060-18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co abrasive systems division
CAGE Code: 078Z1 |
3m alaska
CAGE Code: 0NZU5 |
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
3m united kingdom plc
CAGE Code: K0993,K8767 |
|
3d safety services pty ltd
CAGE Code: Z2JB4 |
1 source electronics inc
CAGE Code: 551K1 |
|
3m health care service center
CAGE Code: 0UTW7 |
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
|
3gen corporation
CAGE Code: 3SPS3 |
3d evolution ltd
CAGE Code: KD959 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
3m norge a s
CAGE Code: N0447 |
|
43 apple hill llc
CAGE Code: 6AKU8 |
| Part Number : S900060-18 | Manufacturer : General Dynamics Land Systems Inc | ||
| NSN Number : 5305-00-151-2919 (5305001512919) | |||
| Item Name : Screw Machine | CAGE Code : 05257 | ||
| NIIN : 001512919 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number S900060-18, that of which is listed with the description Screw Machine; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5305001512919, part number S900060-18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-151-2919 Item PartTypeName: SCREW,MACHINE | 5305 | 001512919 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S900060-18 | 1 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.388 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.438 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
