Part Number : 3011438 | Manufacturer : General Dynamics Land Systems Inc | ||
NSN : 5310-01-346-9430 (5310013469430) | |||
Item Name : Washer Flat | CAGE Code : 1EFH8 | ||
NIIN : 01-346-9430 (013469430) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 13393 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 3011438, that of which is listed with the description Washer Flat; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5310013469430, part number 3011438 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 3011438 | Manufacturer : General Dynamics Land Systems Inc | ||
NSN Number : 5310-01-346-9430 (5310013469430) | |||
Item Name : Washer Flat | CAGE Code : 1EFH8 | ||
NIIN : 013469430 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 3011438, that of which is listed with the description Washer Flat; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5310013469430, part number 3011438 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-01-346-9430 Item PartTypeName: WASHER,FLAT | 5310 | 013469430 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3011438 | 5 | 1 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AGAV | III END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 2 MRAP VARIANTS AND 2 OTHER WEAPON SYSTEMS. |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, 1.062 X 2.000 X .134 H |
MATT | MATERIAL | STEEL OVERALL |
ABMW | PERIPHERAL SHAPE STYLE | ROUND |
ABMX | CENTER HOLE SHAPE STYLE | ROUND |
ADUX | CENTER HOLE WIDTH | 1.062 INCHES NOMINAL |
SFTT | SURFACE TREATMENT | ZINC OVERALL |
FEAT | SPECIAL FEATURES | 1"" HARDENED WASHER NOM ID- 1.062, NOM OD- 2.000, NOM THKNS- .209. STEEL, 1040-1065 PER CEMS A-0, PART 1, QUENCHED AND TEMPERED TO RC 36 TO 42. THESE WASHERS ARE INTENDED FOR USE IN HIGH CLAMPING LOADS, TO MINIMIZE EMBEDDING, AND TO AID TORQUING. |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote