| Part Number : XM62827 | Manufacturer : General Dynamics Land Systems Inc | ||
| NSN : 5340-01-073-7671 (5340010737671) | |||
| Item Name : Bracket Angle | CAGE Code : 01417 | ||
| NIIN : 01-073-7671 (010737671) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number XM62827, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5340010737671, part number XM62827 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : XM62827 | Manufacturer : General Dynamics Land Systems Inc | ||
| NSN Number : 5340-01-073-7671 (5340010737671) | |||
| Item Name : Bracket Angle | CAGE Code : 01417 | ||
| NIIN : 010737671 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number XM62827, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Land Systems Inc and listed alongside the NSN 5340010737671, part number XM62827 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-073-7671 Item PartTypeName: BRACKET,ANGLE | 5340 | 010737671 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| XM62827 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.710 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 2.940 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | TANK COMBAT,FULL TRACKED M1A1 |
| AHLF | SECOND LEG WIDTH | 1.380 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 1.062 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.750 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.472 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.690 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.880 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CUT OUT |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CWMX | FIRST LEG CUTOUT LENGTH | 0.880 INCHES NOMINAL |
| CWMZ | FIRST LEG CUTOUT WIDTH | 0.781 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-6021 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
