| Part Number : 69077600-05 | Manufacturer : General Dynamics Mission Systems | ||
| NSN : 5962-01-058-6739 (5962010586739) | |||
| Item Name : Microcircuit Memory | CAGE Code : 3CYA2 | ||
| NIIN : 01-058-6739 (010586739) | |||
| FSC Code : 5962 Microcircuits Electronic | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 41015 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 6907760005 | |||
Thank you for taking an interest in part number 69077600-05, that of which is listed with the description Microcircuit Memory; Manufactured by General Dynamics Mission Systems and listed alongside the NSN 5962010586739, part number 69077600-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 69077600-05 | Manufacturer : General Dynamics Mission Systems | ||
| NSN Number : 5962-01-058-6739 (5962010586739) | |||
| Item Name : Microcircuit Memory | CAGE Code : 3CYA2 | ||
| NIIN : 010586739 | |||
| FSC CODE : 5962 Microcircuits Electronic | |||
Thank you for taking an interest in part number 69077600-05, that of which is listed with the description Microcircuit Memory; Manufactured by General Dynamics Mission Systems and listed alongside the NSN 5962010586739, part number 69077600-05 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5962-01-058-6739 Item PartTypeName: MICROCIRCUIT,MEMORY | 5962 | 010586739 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ROM/PROM FAMILY 031 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.370 INCHES MINIMUM AND 0.434 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.240 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.049 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 660.0 MILLIWATTS |
| AFGA | OPERATING TEMP RANGE | -55.0/125.0 DEG CELSIUS |
| AFJQ | STORAGE TEMP RANGE | -65.0/150.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | RADAR SET TYPE AN/APS-125 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND PROGRAMMABLE AND PROGRAMMED AND W/ENABLE AND W/BUFFERED OUTPUT |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 10 INPUT |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| CZEQ | TIME RATING PER CHACTERISTIC | 60.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 60.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT |
| CZER | MEMORY DEVICE TYPE | ROM |
| CZZZ | MEMORY CAPACITY | UNKNOWN |
| FEAT | SPECIAL FEATURES | BIT PATTERN TABLE NO. 6 |
| TEST | TEST DATA DOCUMENT | 27963-57991100 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 FLAT LEADS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
