| Part Number : 196B7404 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN : 5315-01-054-6049 (5315010546049) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 05606 | ||
| NIIN : 01-054-6049 (010546049) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16749 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 196B7404, that of which is listed with the description Pin Shoulder Headless; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5315010546049, part number 196B7404 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 196B7404 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN Number : 5315-01-054-6049 (5315010546049) | |||
| Item Name : Pin Shoulder Headless | CAGE Code : 05606 | ||
| NIIN : 010546049 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 196B7404, that of which is listed with the description Pin Shoulder Headless; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5315010546049, part number 196B7404 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-054-6049 Item PartTypeName: PIN,SHOULDER,HEADLESS | 5315 | 010546049 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 196B7404 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AATR | SHANK LENGTH | 1.490 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.190 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.550 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.066 INCHES NOMINAL |
| ABRD | SECOND HOLE DIAMETER | 0.064 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.450 INCHES NOMINAL |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.320 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | 146.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 125.000 MICROINCHES OVERALL |
| FEAT | SPECIAL FEATURES | VSHOULDER IS 0.440 IN. LG,0.245 IN. WD,WITH FLAT CUT 0.350 IN. LG,0.161 IN. DP AT SHAFT END,SHAFT IS CENTERED ALONG WIDTH,0.174 IN. FROM SHOULDER END OPPOSITE FLAT,SHOULDER IS CHAMFERED 0.040 X 45 DEG TWO PLACES ENTIRE1.060 IN. LG |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6395 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE FILM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
