| Part Number : 167C2884 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN : 5340-01-121-5581 (5340011215581) | |||
| Item Name : Bracket Angle | CAGE Code : 05606 | ||
| NIIN : 01-121-5581 (011215581) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 167C2884, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5340011215581, part number 167C2884 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 167C2884 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN Number : 5340-01-121-5581 (5340011215581) | |||
| Item Name : Bracket Angle | CAGE Code : 05606 | ||
| NIIN : 011215581 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 167C2884, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5340011215581, part number 167C2884 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-121-5581 Item PartTypeName: BRACKET,ANGLE | 5340 | 011215581 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 167C2884 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLL | SECOND LEG LENGTH | 1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 3.850 INCHES MINIMUM AND 3.910 INCHES MAXIMUM |
| AHLL | FIRST LEG SLOT LENGTH | 2.380 INCHES NOMINAL |
| AHLM | FIRST LEG SLOT WIDTH | 0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.232 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.113 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.065 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.690 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.350 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.660 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OR STEEL COMP 304L |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC ALL MATERIAL RESPONSES |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
