| Part Number : 92007A1223 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN : 5340-01-459-7484 (5340014597484) | |||
| Item Name : Bracket Angle | CAGE Code : 05606 | ||
| NIIN : 01-459-7484 (014597484) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 92007A1223, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5340014597484, part number 92007A1223 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 92007A1223 | Manufacturer : General Dynamics Ots Global Inc | ||
| NSN Number : 5340-01-459-7484 (5340014597484) | |||
| Item Name : Bracket Angle | CAGE Code : 05606 | ||
| NIIN : 014597484 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 92007A1223, that of which is listed with the description Bracket Angle; Manufactured by General Dynamics Ots Global Inc and listed alongside the NSN 5340014597484, part number 92007A1223 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-459-7484 Item PartTypeName: BRACKET,ANGLE | 5340 | 014597484 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 92007A1223 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE AND TAPERED |
| AHLN | SECOND LEG HOLE DIAMETER | 0.3700 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.5600 INCHES NOMINAL |
| CSSQ | FIRST LEG ANGLE | 0.35 RADIANS MINIMUM AND 0.41 RADIANS MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.9800 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5600 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.7600 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ,ILSTD-171, FIN. 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHPW | FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ANGLE |
| AHLF | SECOND LEG WIDTH | 3.6000 INCHES MINIMUM AND 3.6400 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 3.9700 INCHES MINIMUM AND 4.0300 INCHES MAXIMUM |
| AHLH | SECOND LEG END WIDTH | 0.3200 INCHES NOMINAL |
| AHQQ | FIRST LEG END WIDTH | 2.5000 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 1.4800 INCHES MINIMUM AND 1.5200 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.0000 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.1250 INCHES NOMINAL |
| ADLK | FIRST LEG LENGTH | 2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 6.1200 INCHES MINIMUM AND 6.1800 INCHES MAXIMUM |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AJZU | FIRST LEG STYLE | ANGLE |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
