| Part Number : L43154G02 | Manufacturer : General Electric Company | ||
| NSN : 2040-01-515-8321 (2040015158321) | |||
| Item Name : Hinge Assembly Marine Structural | CAGE Code : 07482 | ||
| NIIN : 01-515-8321 (015158321) | |||
| FSC Code : 2040 Marine Hardware and Hull Items | |||
| FSG Code : 20 Ship and Marine Equipment | |||
| INC Code : 52353 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number L43154G02, that of which is listed with the description Hinge Assembly Marine Structural; Manufactured by General Electric Company and listed alongside the NSN 2040015158321, part number L43154G02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m co abrasive systems division
CAGE Code: 078Z1 |
14 dock drive inc
CAGE Code: 14677 |
|
1st american metals inc
CAGE Code: 0MP49 |
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
2709th af vehicle control group
CAGE Code: 10994 |
|
4m sigma corporation
CAGE Code: 0BC31 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
3 ring inc
CAGE Code: 68310 |
3m france
CAGE Code: F0347 |
|
3 l filters ltd
CAGE Code: 37941 |
3dfx interactive
CAGE Code: KA796 |
|
3m aerospace
CAGE Code: R0844 |
2056 company
CAGE Code: 7F967 |
|
3ps inc
CAGE Code: 1MHK2 |
| Part Number : L43154G02 | Manufacturer : General Electric Company | ||
| NSN Number : 2040-01-515-8321 (2040015158321) | |||
| Item Name : Hinge Assembly Marine Structural | CAGE Code : 07482 | ||
| NIIN : 015158321 | |||
| FSC CODE : 2040 Marine Hardware and Hull Items | |||
Thank you for taking an interest in part number L43154G02, that of which is listed with the description Hinge Assembly Marine Structural; Manufactured by General Electric Company and listed alongside the NSN 2040015158321, part number L43154G02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | III END ITEM IDENTIFICATION | LM2500 BASE ENCLOSURE-LH |
| MATL | MATERIAL | STEEL |
| FEAT | SPECIAL FEATURES | MDCL ASTM-A36 OR AS3678-250 OR AS NOTED. MATERIAL SHALL CONFORM TO AMS 5643 WITH THE FOLLOWING EXCEPTIONS: 1) PRECIPATATION HEAT TREAT AT 1050 FAHRENEIT (+/-10 FAHRENHEIT) FOR 4 HOURS (+/-15 MINUTES); 2) PROPERTIES SHALL BE: TENSILE STRENGTH 150,000 PSI MIN YIELD, YIELD STRENGTH (.2% OFFSET) 133,000 PSI MIN, ELONGATION (IN 2 INCHES) 12% MIN, REDUCTION OF AREA 45% MIN, HARDNESS TO BE CHECKED ON 1 INCH FLAT PROVIDED ON THE SIDE OPPOSITE KEYWAY, THREE READINGS AT EACH END |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
