| Part Number : 738048-1 | Manufacturer : General Electric Company | ||
| NSN : 3110-01-097-4975 (3110010974975) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 99207 | ||
| NIIN : 01-097-4975 (010974975) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 7380481 | |||
Thank you for taking an interest in part number 738048-1, that of which is listed with the description Bearing Ball Annular; Manufactured by General Electric Company and listed alongside the NSN 3110010974975, part number 738048-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 738048-1 | Manufacturer : General Electric Company | ||
| NSN Number : 3110-01-097-4975 (3110010974975) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 99207 | ||
| NIIN : 010974975 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 738048-1, that of which is listed with the description Bearing Ball Annular; Manufactured by General Electric Company and listed alongside the NSN 3110010974975, part number 738048-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-097-4975 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 010974975 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SR2F7P28L02 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.1552 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.4390 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0280 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM |
| AGVV | OUTER RING OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| FEAT | SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C56.0 TO C.64.0 ROCKWELL HARDNESS RINGS AND BALLS |
| LBMA | LUBRICATION MATERIAL | LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-197 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440A OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | LOADING GROOVE,NON-SEPARABLE |
| TEST | TEST DATA DOCUMENT | 73030-738048-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
