| Part Number : 3C3608G02 | Manufacturer : General Electric Company | ||
| NSN : 4920-01-443-8012 (4920014438012) | |||
| Item Name : Fixture Machining A | CAGE Code : 07482 | ||
| NIIN : 01-443-8012 (014438012) | |||
| FSC Code : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment | |||
| FSG Code : 49 Maintenance And Repair Shop Equipment | |||
| INC Code : 52377 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 3C3608G02, that of which is listed with the description Fixture Machining A; Manufactured by General Electric Company and listed alongside the NSN 4920014438012, part number 3C3608G02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3C3608G02 | Manufacturer : General Electric Company | ||
| NSN Number : 4920-01-443-8012 (4920014438012) | |||
| Item Name : Fixture Machining A | CAGE Code : 07482 | ||
| NIIN : 014438012 | |||
| FSC CODE : 4920 Aircraft Maintenance And Repair Shop Specialized Equipment | |||
Thank you for taking an interest in part number 3C3608G02, that of which is listed with the description Fixture Machining A; Manufactured by General Electric Company and listed alongside the NSN 4920014438012, part number 3C3608G02 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| CZDH | NOMINAL OVERALL DIAMETER | 21.000 INCHES |
| AGAV | III END ITEM IDENTIFICATION | F118-GE-100 ACFT ENG AGE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE, MACHINE-INSPECTION AIR SEAL PRESSURE TURBINE FWD |
| RDAL | REFERENCE DATA AND LITERATURE | SERD NO. 6046 |
| SR-5 | THE MANUFACTURERS DATA | |
| SR-5 | MANUFACTURERS CODE | 07482 |
| FEAT | SPECIAL FEATURES | C/O RING OF ALLOY STEEL; 2 RABBETS ARE MACHINED ON INSIDE OF THIS RING TO PROVIDE A TIGHT FIT ON THE OUTSIDE OF THE SEAL HOUSING. THE LOWER SIDE HAS BEEN MACHINED ON A 16.380 I.D. BY 0.900 D. TO LOCAATE THE STRIPPER RING. THE STRIPPER RING IS 16.250 O.D. BY 13.250 I.D. BY 0.500 THK. AND IS TAPPED IN 6 LOCATIONS FOR 0.375 UNC BOLTS. THE FIXTURE RING IS DRILLED AND TAPPED IN 18 LOCATIONS FOR 0.375 BY 16.000 UNC BOLTS WHICH ATTACH THE 6 CLAMP PADS AND 6 SUPPORT BLOCKS. THE CLAMP PADS AND SUPPORT BLOCKS ARE USED FOR RETAINING THE SEAL IN THE FIXTURE DURING MACHING AND INSPECTION OPERATIONS; MFGR NOUN: FIXTURE,MACHINING |
| SR-5 | DESIGN CONTROL REFERENCE | 3C3608G02 |
| FTLD | FUNCTIONAL DESCRIPTION | USED TO REMOVE/REPLACE THE LPT FORWARD ROTATING AIR SEAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
