| Part Number : 1753M36P01 | Manufacturer : General Electric Company | ||
| NSN : 5310-01-502-9544 (5310015029544) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 07482 | ||
| NIIN : 01-502-9544 (015029544) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 1753M36P01, that of which is listed with the description Nut Plain Hexagon; Manufactured by General Electric Company and listed alongside the NSN 5310015029544, part number 1753M36P01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1753M36P01 | Manufacturer : General Electric Company | ||
| NSN Number : 5310-01-502-9544 (5310015029544) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 07482 | ||
| NIIN : 015029544 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 1753M36P01, that of which is listed with the description Nut Plain Hexagon; Manufactured by General Electric Company and listed alongside the NSN 5310015029544, part number 1753M36P01 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-502-9544 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 015029544 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BF-7208-10E | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQFM | HARDNESS RATING | NOT RATED |
| ASDB | WIDTH ACROSS FLATS | 0.795 INCHES MINIMUM AND 0.829 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F110 ENGINE |
| AZKQ | TEMP RATING | NOT RATED |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ADEA | NUT HEIGHT | 0.108 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 1753M36P01 |
| ACTA | NUT STYLE | HEXAGON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5640, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| CRSQ | COUNTERSINK ANGLE | 150.0 DEGREES NOMINAL BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| AGGP | DRILLED HOLE DIAMETER | 0.042 INCHES MINIMUM |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| BZRR | THREAD SERIES | UN |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES |
| AAJD | THREAD CLASS | 2B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| FEAT | SPECIAL FEATURES | BOTH ENDS CHAMFERED 13-17 DEGREES |
| SR-1 | MANUFACTURERS CODE | 07482 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
