Part Number : 9365M41P229 | Manufacturer : General Electric Company | ||
NSN : 5331-01-475-6591 (5331014756591) | |||
Item Name : O Ring | CAGE Code : 07482 | ||
NIIN : 01-475-6591 (014756591) | |||
FSC Code : 5331 O Ring | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 47946 | |||
NCB Code : 01 | Country : USA |
Thank you for taking an interest in part number 9365M41P229, that of which is listed with the description O Ring; Manufactured by General Electric Company and listed alongside the NSN 5331014756591, part number 9365M41P229 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 9365M41P229 | Manufacturer : General Electric Company | ||
NSN Number : 5331-01-475-6591 (5331014756591) | |||
Item Name : O Ring | CAGE Code : 07482 | ||
NIIN : 014756591 | |||
FSC CODE : 5331 O Ring |
Thank you for taking an interest in part number 9365M41P229, that of which is listed with the description O Ring; Manufactured by General Electric Company and listed alongside the NSN 5331014756591, part number 9365M41P229 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5331-01-475-6591 Item PartTypeName: O-RING | 5331 | 014756591 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
9365M41P229 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ADVN | CROSS-SECTIONAL HEIGHT | 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
ADYT | CENTER HOLE DIAMETER | 3.100 INCHES MINIMUM AND 3.130 INCHES MAXIMUM |
AGAV | END ITEM IDENTIFICATION | TICONDEROGA CLASS CG |
FEAT | SPECIAL FEATURES | O-RING REQUIREMENTS ARE PER GE SPEC A50TF156 CLASS A USED WITH THE LM2500 AGB STARTER DRIVE CARBON SEAL |
MATT | MATERIAL | RUBBER FLUOROCARBON CLASS FPM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote