| Part Number : J690P7879A | Manufacturer : General Electric Company | ||
| NSN : 5905-01-260-3775 (5905012603775) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 07482 | ||
| NIIN : 01-260-3775 (012603775) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37403 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number J690P7879A, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by General Electric Company and listed alongside the NSN 5905012603775, part number J690P7879A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : J690P7879A | Manufacturer : General Electric Company | ||
| NSN Number : 5905-01-260-3775 (5905012603775) | |||
| Item Name : Resistor Fixed Wire Wound Induct | CAGE Code : 07482 | ||
| NIIN : 012603775 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number J690P7879A, that of which is listed with the description Resistor Fixed Wire Wound Induct; Manufactured by General Electric Company and listed alongside the NSN 5905012603775, part number J690P7879A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-260-3775 Item PartTypeName: RESISTOR,FIXED,WIRE WOUND,INDUCT | 5905 | 012603775 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| J690 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 |
| AAPP | ELECTRICAL RESISTANCE | 78.700 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.437 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 25.0 DEG CELSIUS |
| AGAV | END ITEM IDENTIFICATION | F110 ENGINE |
| AKNA | INCLOSURE TYPE | ENCAPSULATED |
| CBME | CUBIC MEASURE | 0.005 CUBIC INCHES |
| CSCF | TERMINAL TYPE | WIRE LEAD |
| PKWT | UNPACKAGED UNIT WEIGHT | 0.34 GRAMS |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 07482-J690 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
