| Part Number : 30444-0019 | Manufacturer : General Engineering Works | ||
| NSN : 6635-01-458-1290 (6635014581290) | |||
| Item Name : Tensiometer Dial In | CAGE Code : 03834 | ||
| NIIN : 01-458-1290 (014581290) | |||
| FSC Code : 6635 Physical Properties Testing And Inspection | |||
| FSG Code : 66 Instruments and Laboratory Equipment | |||
| INC Code : 18902 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 304440019 | |||
Thank you for taking an interest in part number 30444-0019, that of which is listed with the description Tensiometer Dial In; Manufactured by General Engineering Works and listed alongside the NSN 6635014581290, part number 30444-0019 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 30444-0019 | Manufacturer : General Engineering Works | ||
| NSN Number : 6635-01-458-1290 (6635014581290) | |||
| Item Name : Tensiometer Dial In | CAGE Code : 03834 | ||
| NIIN : 014581290 | |||
| FSC CODE : 6635 Physical Properties Testing And Inspection | |||
Thank you for taking an interest in part number 30444-0019, that of which is listed with the description Tensiometer Dial In; Manufactured by General Engineering Works and listed alongside the NSN 6635014581290, part number 30444-0019 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BHHY | DEFLECTION ANGLE ADJUSTER | NOT INCLUDED |
| AFJU | CARRYING CASE | NOT PROVIDED |
| APSK | SCALE RANGE | 0.0 TO 1000.0 POUNDS |
| AXGY | MOUNTING METHOD | BRACKET |
| FEAT | SPECIAL FEATURES | A PRECISION DIAL INDICATOR IS MOUNTED AT THE NULL POINT OF THE DEFLECTION BEAM; THE POINTER REVOLVES 360 DEGREES CLOCKWISE UNDER COMPRESSION OR TENSION FORCES; ACCIDENTAL OVERLOADS UP TO 30 PERCENT OF CAPACITY CAN BE SAFELY SUSTAINED WITHOUT INJURY TO THE DIAL INDICATOR OR DEFLECTION BEAM; ALL CAPACITIES FEATURE A 5:1 DESIGN SAFETY FACTOR; MAY BE MOUNTED HORIZONTALLY, VERTICALLY OR FLAT; THE BAKED ENAMEL FINISH RESISTS CORROSION AND RUST; ACCURACY OF +/- ONE PERCENT OF FULL CAPACITY; DIAL DIVISION 10 LBS INCREMENTS |
| APSJ | SCALE QUANTITY | 1 |
| BHHW | MATERIAL ACCOMMODATED DIAMETER | 0.500 INCHES NOMINAL |
| ASPX | SCALE NAME | COMPRESSION |
| FTLD | III FUNCTIONAL DESCRIPTION | LOAD IS APPLIED AGAINST A HARDENED BALL WHICH ROTATES TO MAINTAIN VERTICAL ALIGNMENT AS PRESSURE INCREASES; THE BALL IS HELD IN PLACE WITH A SPRING CLIP; THE THREADED MOUNTING HOLE IS LOCATE OPPOSITE THE LOADING BALL IN THE BOTTOM OF THE BEAM |
| AMKD | INDICATOR TYPE | DIAL |
| BGTX | TEMPERATURE COMPENSATOR | NOT INCLUDED |
| AGAV | III END ITEM IDENTIFICATION | PACER DAWN |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
