| Part Number : S2-13 | Manufacturer : General Metals Powder Company | ||
| NSN : 3110-00-888-7414 (3110008887414) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 01141 | ||
| NIIN : 00-888-7414 (008887414) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S213 | |||
Thank you for taking an interest in part number S2-13, that of which is listed with the description Bearing Ball Annular; Manufactured by General Metals Powder Company and listed alongside the NSN 3110008887414, part number S2-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2mb international
CAGE Code: FA7N3 |
394 test maintenance squadron sac
CAGE Code: 33044 |
|
20th century fiberglass
CAGE Code: 80241 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
2is inc
CAGE Code: 1ZKD0 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
28eme groupe geographique
CAGE Code: FAR17 |
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
|
3d robotics llc
CAGE Code: 64TY6 |
1 nation electronics llc
CAGE Code: 1XP36 |
|
2101 llc
CAGE Code: 1GH76 |
2056 company
CAGE Code: 7F967 |
|
2eme regiment du materiel
CAGE Code: FARD5 |
2connect it b v
CAGE Code: HG221 |
|
3 d machining inc
CAGE Code: 09SY7 |
| Part Number : S2-13 | Manufacturer : General Metals Powder Company | ||
| NSN Number : 3110-00-888-7414 (3110008887414) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 01141 | ||
| NIIN : 008887414 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number S2-13, that of which is listed with the description Bearing Ball Annular; Manufactured by General Metals Powder Company and listed alongside the NSN 3110008887414, part number S2-13 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-888-7414 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 008887414 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SSRIF814ZZLY48 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.1875 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.5470 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | CRTL |
| AGFF | FLANGE WIDTH | 0.0450 INCHES NOMINAL |
| AGVV | OUTER RING OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
