| Part Number : 2254394 | Manufacturer : General Motors Corp | ||
| NSN : 3020-00-287-8215 (3020002878215) | |||
| Item Name : Gear Worm | CAGE Code : 7X677 | ||
| NIIN : 00-287-8215 (002878215) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05467 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 2254394, that of which is listed with the description Gear Worm; Manufactured by General Motors Corp and listed alongside the NSN 3020002878215, part number 2254394 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2254394 | Manufacturer : General Motors Corp | ||
| NSN Number : 3020-00-287-8215 (3020002878215) | |||
| Item Name : Gear Worm | CAGE Code : 7X677 | ||
| NIIN : 002878215 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 2254394, that of which is listed with the description Gear Worm; Manufactured by General Motors Corp and listed alongside the NSN 3020002878215, part number 2254394 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-287-8215 Item PartTypeName: GEAR,WORM | 3020 | 002878215 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FD8774 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 0.6670 INCHES MINIMUM AND 0.6720 INCHES MAXIMUM |
| ALPN | FACE TYPE | STRAIGHT |
| ANTP | BORE STYLE | HEX BOTH ENDS |
| CQFM | HARDNESS RATING | 0.010 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.797 INCHES |
| CWCN | NOMINAL WIDTH ACROSS FLATS | 0.382 INCHES BOTH ENDS |
| CWPC | THREAD FORM QUANTITY | 1 |
| CWPH | THREAD FORM DIRECTION | LEFT-HAND |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 20.6640 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.781 INCHES |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.296 INCHES BOTH ENDS |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.500 INCHES BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 1018 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | -C-16232 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | HUBLESS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
