| Part Number : 3239092 | Manufacturer : General Motors Corp | ||
| NSN : 3020-00-391-0925 (3020003910925) | |||
| Item Name : Gear Helical | CAGE Code : 72915 | ||
| NIIN : 00-391-0925 (003910925) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3239092, that of which is listed with the description Gear Helical; Manufactured by General Motors Corp and listed alongside the NSN 3020003910925, part number 3239092 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3239092 | Manufacturer : General Motors Corp | ||
| NSN Number : 3020-00-391-0925 (3020003910925) | |||
| Item Name : Gear Helical | CAGE Code : 72915 | ||
| NIIN : 003910925 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 3239092, that of which is listed with the description Gear Helical; Manufactured by General Motors Corp and listed alongside the NSN 3020003910925, part number 3239092 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-0925 Item PartTypeName: GEAR,HELICAL | 3020 | 003910925 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3239092 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 16.0000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 16.043 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 14.9167 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 2.500 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 3.000 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.377 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.698 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 4.500 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 4.500 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | FIG 2 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TEETH AND ON LOWER VERTICAL CENTER LINE,FIG 3 STAMPED ON SIDE OF GEAR FACE ON CENTER LINE OF TOOTH SPACE 150 DEG 45 MIN CW FROM FIG 2 |
| MATT | MATERIAL | STEEL COMP 1035 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | FLUSH HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
