| Part Number : 5121815 | Manufacturer : General Motors Corp | ||
| NSN : 3020-00-745-7738 (3020007457738) | |||
| Item Name : Gear Helical | CAGE Code : 71934 | ||
| NIIN : 00-745-7738 (007457738) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 5121815, that of which is listed with the description Gear Helical; Manufactured by General Motors Corp and listed alongside the NSN 3020007457738, part number 5121815 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5121815 | Manufacturer : General Motors Corp | ||
| NSN Number : 3020-00-745-7738 (3020007457738) | |||
| Item Name : Gear Helical | CAGE Code : 71934 | ||
| NIIN : 007457738 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 5121815, that of which is listed with the description Gear Helical; Manufactured by General Motors Corp and listed alongside the NSN 3020007457738, part number 5121815 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-745-7738 Item PartTypeName: GEAR,HELICAL | 3020 | 007457738 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5153270 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | GRUMMAN AEROSPACE A-10 AIRCRAFT |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.495 INCHES |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.063 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 1.187 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.717 INCHES BOTH ENDS |
| AAQL | BODY STYLE | WEBBED,OFFSET,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 8.2500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 78 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 16.0000 DEGREES |
| CWPZ | HELIX ANGLE | 19.0114 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.188 INCHES |
| CWSN | KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.187 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
