| Part Number : 5121958 | Manufacturer : General Motors Corp | ||
| NSN : 3020-00-838-9670 (3020008389670) | |||
| Item Name : Gear Spur | CAGE Code : 24617 | ||
| NIIN : 00-838-9670 (008389670) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05466 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 5121958, that of which is listed with the description Gear Spur; Manufactured by General Motors Corp and listed alongside the NSN 3020008389670, part number 5121958 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5121958 | Manufacturer : General Motors Corp | ||
| NSN Number : 3020-00-838-9670 (3020008389670) | |||
| Item Name : Gear Spur | CAGE Code : 24617 | ||
| NIIN : 008389670 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number 5121958, that of which is listed with the description Gear Spur; Manufactured by General Motors Corp and listed alongside the NSN 3020008389670, part number 5121958 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-838-9670 Item PartTypeName: GEAR,SPUR | 3020 | 008389670 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5121958 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 7.9000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 79 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM TEETH |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.480 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.240 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.760 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.501 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.188 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.630 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 1141 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
| CWCD | NOMINAL OUTSIDE DIAMETER | 8.095 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWTX | HUB NOMINAL DIAMETER | 3.120 INCHES BOTH ENDS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
