| Part Number : 8679950 | Manufacturer : General Motors Corp | ||
| NSN : 3040-01-149-6706 (3040011496706) | |||
| Item Name : Shaft Straight | CAGE Code : 7X677 | ||
| NIIN : 01-149-6706 (011496706) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 22109 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 8679950, that of which is listed with the description Shaft Straight; Manufactured by General Motors Corp and listed alongside the NSN 3040011496706, part number 8679950 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 8679950 | Manufacturer : General Motors Corp | ||
| NSN Number : 3040-01-149-6706 (3040011496706) | |||
| Item Name : Shaft Straight | CAGE Code : 7X677 | ||
| NIIN : 011496706 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 8679950, that of which is listed with the description Shaft Straight; Manufactured by General Motors Corp and listed alongside the NSN 3040011496706, part number 8679950 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-149-6706 Item PartTypeName: SHAFT,STRAIGHT | 3040 | 011496706 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2520011496706 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| ABHP | OVERALL LENGTH | 9.200 INCHES MINIMUM AND 9.280 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.9800 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 1.280 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.9050 INCHES MINIMUM AND 0.9100 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9750 INCHES MINIMUM AND 0.9930 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 0.9375 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.9880 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 0.860 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.9050 INCHES MINIMUM AND 0.9100 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.9750 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.9375 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 30 |
| BDSR | SECOND END SPLINE QUANTITY | 30 |
| CSYM | SURFACE FINISH | 10.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | BOTH ENDS PARTIAL BORE,0.312 IN. DIA,2.870 IN. LG FIRST END,1.410 IN. LG SECOND END;BOTH ENDS CIR GROOVED,0.150 IN. W,0.895 IN. DIA,1.280 IN. DISTANCE FROM FIRST END TO GROOVE,0.860 IN. DISTANCE FROM SECOND END TO GROOVE;FIRST END TWO CROSS |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 10B46 ASSN STD SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
