| Part Number : R3DDBL7J | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-034-2152 (3110000342152) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 7X677 | ||
| NIIN : 00-034-2152 (000342152) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number R3DDBL7J, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110000342152, part number R3DDBL7J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : R3DDBL7J | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-034-2152 (3110000342152) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 7X677 | ||
| NIIN : 000342152 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number R3DDBL7J, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110000342152, part number R3DDBL7J is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-034-2152 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 000342152 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R3DDBL7J | 1 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.3114 INCHES MINIMUM AND 0.3124 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1873 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYC | CALIBRATION DESIGNATOR | C |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | EXTRA LOOSE |
| AKVV | INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
| CTHQ | BEARING PRELOAD RATING | 2.0 POUNDS NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING SEPARATOR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
