| Part Number : 99504X1292ANG5 | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-109-1123 (3110001091123) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 00-109-1123 (001091123) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 99504X1292ANG5, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001091123, part number 99504X1292ANG5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
498 msug
CAGE Code: 5VW08 |
1db metravib
CAGE Code: FAQ34 |
|
451676 ontario ltd
CAGE Code: 38552 |
2h energy
CAGE Code: F1797 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
12 volt shop
CAGE Code: Z0JM2 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
3h products co
CAGE Code: 0CJ60 |
3m company communication markets
CAGE Code: 0VGY3 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
4 s mfg
CAGE Code: 0D9C0 |
|
1 source electronics inc
CAGE Code: 551K1 |
| Part Number : 99504X1292ANG5 | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-109-1123 (3110001091123) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 001091123 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 99504X1292ANG5, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001091123, part number 99504X1292ANG5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-109-1123 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 001091123 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 35-246 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 14.0 MILLIMETERS NOMINAL |
| ABXV | BORE DIAMETER | 20.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 47.00 MILLIMETERS NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGAV | END ITEM IDENTIFICATION | NSN 2420-66-148-7692,HMEE (HIGH MOBILITY ENGINEEREXCAVATOR) |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
