| Part Number : Z99505X | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-109-1155 (3110001091155) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 00-109-1155 (001091155) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number Z99505X, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001091155, part number Z99505X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
5dt inc
CAGE Code: 3BPF1 |
5 11 inc
CAGE Code: 3YEL6 |
|
313 aerospace llc
CAGE Code: 3VEK3 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
3075109 canada inc
CAGE Code: L09L0 |
|
3m france
CAGE Code: F0347 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
1st american metals inc
CAGE Code: 0MP49 |
4m sigma corporation
CAGE Code: 0BC31 |
|
20th century spring mfg
CAGE Code: 0PZE8 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
14 dock drive inc
CAGE Code: 14677 |
21st century optics inc
CAGE Code: 0TN38 |
|
3d pep
CAGE Code: FB830 |
| Part Number : Z99505X | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-109-1155 (3110001091155) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 001091155 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number Z99505X, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001091155, part number Z99505X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-109-1155 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 001091155 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 29463 | 3 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 15.0 MILLIMETERS NOMINAL |
| ABXV | BORE DIAMETER | 25.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 52.00 MILLIMETERS NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
