| Part Number : 88013T1C | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-198-1429 (3110001981429) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 00-198-1429 (001981429) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 88013T1C, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001981429, part number 88013T1C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
17th st photo supply inc
CAGE Code: 1VV61 |
498 msug
CAGE Code: 5VW08 |
|
21st century paramount inc
CAGE Code: 55428 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
4 ld inc
CAGE Code: 0ACW5 |
400hz repair
CAGE Code: 03MS6 |
|
2101 llc
CAGE Code: 1GH76 |
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
|
3m health care service center
CAGE Code: 0UTW7 |
3m medical imaging
CAGE Code: 0ZRE5 |
|
1343080 alberta ltd
CAGE Code: L0796 |
184th air refueling wing
CAGE Code: 3EP27 |
|
3m health care ltd
CAGE Code: U5989 |
25 canadian forces supply depot
CAGE Code: 35637 |
|
5 11 inc
CAGE Code: 3YEL6 |
| Part Number : 88013T1C | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-198-1429 (3110001981429) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43334 | ||
| NIIN : 001981429 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 88013T1C, that of which is listed with the description Bearing Ball Annular; Manufactured by General Motors Corp and listed alongside the NSN 3110001981429, part number 88013T1C is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-198-1429 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 001981429 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H201KLL3FS381A | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 13.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 32.00 MILLIMETERS NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 0.3940 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.6060 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
