| Part Number : 6816387 | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-651-0320 (3110006510320) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 24617 | ||
| NIIN : 00-651-0320 (006510320) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6816387, that of which is listed with the description Bearing Ball Rod End; Manufactured by General Motors Corp and listed alongside the NSN 3110006510320, part number 6816387 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 d machining inc
CAGE Code: 09SY7 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
200 park inc
CAGE Code: 3CKS7 |
|
3d energy pty ltd
CAGE Code: Z0UA3 |
3m co engineering document systems
CAGE Code: 1BY21 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
320 matlogpel breda centrale
CAGE Code: H2851 |
|
3m health care ltd
CAGE Code: U5989 |
2is inc
CAGE Code: 1ZKD0 |
|
3 d mfg inc
CAGE Code: 66484 |
5605 n illinois inc
CAGE Code: 089F4 |
|
21st century electronics inc
CAGE Code: 60092 |
3 v fastener co inc
CAGE Code: 1ER65 |
|
3m italia spa
CAGE Code: A3445 |
| Part Number : 6816387 | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-651-0320 (3110006510320) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 24617 | ||
| NIIN : 006510320 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 6816387, that of which is listed with the description Bearing Ball Rod End; Manufactured by General Motors Corp and listed alongside the NSN 3110006510320, part number 6816387 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-651-0320 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 006510320 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6816387 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| AAZE | SHANK DIAMETER | 0.4380 INCHES NOMINAL |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| ABHP | OVERALL LENGTH | 1.9380 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 0.8120 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4380 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.5930 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.4690 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | 0.4380 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
