| Part Number : Q0L03DT | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-849-5700 (3110008495700) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 00-849-5700 (008495700) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number Q0L03DT, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110008495700, part number Q0L03DT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : Q0L03DT | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-849-5700 (3110008495700) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 008495700 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number Q0L03DT, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110008495700, part number Q0L03DT is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-849-5700 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 008495700 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Q0L03DT | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.7824 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.6693 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3780 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C RETAINER OR PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,FACE TO FACE MOUNTING |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
