| Part Number : Q30315DT7077 | Manufacturer : General Motors Corp | ||
| NSN : 3110-00-992-1016 (3110009921016) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 00-992-1016 (009921016) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number Q30315DT7077, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110009921016, part number Q30315DT7077 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2eme regiment du materiel
CAGE Code: FARD5 |
3m health care service center
CAGE Code: 0UTW7 |
|
3m purification inc
CAGE Code: 15472 |
3 m federal systems dept
CAGE Code: 68352 |
|
1db metravib
CAGE Code: FAQ34 |
4fastplumber llc
CAGE Code: 4P0W6 |
|
2101 llc
CAGE Code: 1GH76 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
3d
CAGE Code: 0WY47 |
3dfx interactive
CAGE Code: KA796 |
|
3 y power technology inc
CAGE Code: 1XVP7 |
2mb international
CAGE Code: FA7N3 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
3 phoenix inc
CAGE Code: 3NJE3 |
|
21st century electronics inc
CAGE Code: 60092 |
| Part Number : Q30315DT7077 | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-00-992-1016 (3110009921016) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 009921016 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number Q30315DT7077, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110009921016, part number Q30315DT7077 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-992-1016 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 009921016 | X | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Q30315DT7077 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.4517 INCHES MINIMUM AND 1.4567 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 2.9526 INCHES MINIMUM AND 2.9528 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 6.2990 INCHES MINIMUM AND 6.2992 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | LUBRICATING OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 134 TYPE AND 1 CLASS |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | ANNUAL BALL BEARING FOR QUIET OPERATION APPLICATION TO SUBMARINE USAGE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
