| Part Number : Q0L04-DTL-1A | Manufacturer : General Motors Corp | ||
| NSN : 3110-01-171-9437 (3110011719437) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 01-171-9437 (011719437) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: Q0L04DTL1A | |||
Thank you for taking an interest in part number Q0L04-DTL-1A, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110011719437, part number Q0L04-DTL-1A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : Q0L04-DTL-1A | Manufacturer : General Motors Corp | ||
| NSN Number : 3110-01-171-9437 (3110011719437) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 43334 | ||
| NIIN : 011719437 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number Q0L04-DTL-1A, that of which is listed with the description Bearing Ball Duplex; Manufactured by General Motors Corp and listed alongside the NSN 3110011719437, part number Q0L04-DTL-1A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-171-9437 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011719437 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Q0L04-DTL-1A | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.9448 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.6530 INCHES MINIMUM AND 1.6535 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | UNGROUND |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHY | CONTACT ANGLE | 15.0 DEGREES NOMINAL |
| MATT | MATERIAL | PLASTIC PHENOLIC SEPARATOR |
| MATT | MATERIAL | STEEL BALL |
| STYL | STYLE DESIGNATOR | UNIVERSAL GROUND FACES,COUNTERBORED OUTER RING,SEPARABLE |
| TEST | TEST DATA DOCUMENT | 53711-5189737 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
