Part Number : 3738 | Manufacturer : General Motors Corp | ||
NSN : 5120-00-032-9606 (5120000329606) | |||
Item Name : Holder | CAGE Code : 7X677 | ||
NIIN : 00-032-9606 (000329606) | |||
FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
FSG Code : 51 Hand Tools | |||
INC Code : 77777 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 3738, that of which is listed with the description Holder; Manufactured by General Motors Corp and listed alongside the NSN 5120000329606, part number 3738 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 3738 | Manufacturer : General Motors Corp | ||
NSN Number : 5120-00-032-9606 (5120000329606) | |||
Item Name : Holder | CAGE Code : 7X677 | ||
NIIN : 000329606 | |||
FSC CODE : 5120 Hand Tools Nonedged Nonpowered |
Thank you for taking an interest in part number 3738, that of which is listed with the description Holder; Manufactured by General Motors Corp and listed alongside the NSN 5120000329606, part number 3738 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
SR-5 | THE MANUFACTURERS DATA | |
SR-5 | MANUFACTURERS CODE | 24617 |
AGAV | III END ITEM IDENTIFICATION | T-56 TURBOPROP ENGINE |
TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | ITEM CONSISTS OF 5 3/4 IN. LONG,23/16 IN. WIDE,1 EA HOLE AT EA. END,1 1/16 IN. DIA HOLE AT CENTER WITH 24 POINT SPLINE,CENTER HOLE IS 1 5/8 IN. LG,PLATE AROUND EDGE OF SPLINE IS 5/16 IN. THICK |
SR-5 | DESIGN CONTROL REFERENCE | 3738 |
RDAL | III REFERENCE DATA AND LITERATURE | TO 2J-T56-24; NAVAIR 02B-5DA-504 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote