| Part Number : 125972 | Manufacturer : General Motors Corp | ||
| NSN : 5305-00-011-1687 (5305000111687) | |||
| Item Name : Screw Tapping | CAGE Code : 24617 | ||
| NIIN : 00-011-1687 (000111687) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 41756 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 125972, that of which is listed with the description Screw Tapping; Manufactured by General Motors Corp and listed alongside the NSN 5305000111687, part number 125972 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 125972 | Manufacturer : General Motors Corp | ||
| NSN Number : 5305-00-011-1687 (5305000111687) | |||
| Item Name : Screw Tapping | CAGE Code : 24617 | ||
| NIIN : 000111687 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 125972, that of which is listed with the description Screw Tapping; Manufactured by General Motors Corp and listed alongside the NSN 5305000111687, part number 125972 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-011-1687 Item PartTypeName: SCREW,TAPPING | 5305 | 000111687 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 111687 | 1 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CRGF | NONMACHINE THREAD STYLE | GIMLET POINT (TYPE A,AB OR BA) |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.190 INCHES |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
