Part Number : H-B-751 TY2 | Manufacturer : General Services Administration Inc | ||
NSN : 7920-00-297-1509 (7920002971509) | |||
Item Name : Brush Window | CAGE Code : 80244 | ||
NIIN : 00-297-1509 (002971509) | |||
INC Code : 04816 | |||
NCB Code : 00 | Country : USA | ||
Alternate P/N: HB751TY2 |
Thank you for taking an interest in part number H-B-751 TY2, that of which is listed with the description Brush Window; Manufactured by General Services Administration Inc and listed alongside the NSN 7920002971509, part number H-B-751 TY2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : H-B-751 TY2 | Manufacturer : General Services Administration Inc | ||
NSN Number : 7920-00-297-1509 (7920002971509) | |||
Item Name : Brush Window | CAGE Code : 80244 | ||
NIIN : 002971509 |
Thank you for taking an interest in part number H-B-751 TY2, that of which is listed with the description Brush Window; Manufactured by General Services Administration Inc and listed alongside the NSN 7920002971509, part number H-B-751 TY2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
7920-00-297-1509 Item PartTypeName: BRUSH,WINDOW | 7920 | 002971509 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
A | ||||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
7920-00-297-1509 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
BKDT | BRUSH PART LENGTH | 7.750 INCHES MINIMUM AND 8.250 INCHES MAXIMUM |
BKFD | BRUSH PART WIDTH | 2.250 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
FEAT | SPECIAL FEATURES | THE BRUSH BLOCK HAS TWO HANDLE HOLES,EACH WITH A MINIMUM DEPTH OF 1 INCH,CENTERED ON THE LONG SIDES OF THE BLOCK DIRECTLY OPPOSITE FROM EACH OTHER,AND ANGLED APPROXIMATELY 45 DEGREES FROM THE BRUSH FACE OF THE BLOCK; ONE HOLE IS THREADED |
SHPE | SHAPE | OBLONG |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote