| Part Number : 41W1176-70 | Manufacturer : General Stores Supply Office | ||
| NSN : 5120-00-277-2694 (5120002772694) | |||
| Item Name : Wrench Open End | CAGE Code : 95683 | ||
| NIIN : 00-277-2694 (002772694) | |||
| FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
| FSG Code : 51 Hand Tools | |||
| INC Code : 17182 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 41W117670 | |||
Thank you for taking an interest in part number 41W1176-70, that of which is listed with the description Wrench Open End; Manufactured by General Stores Supply Office and listed alongside the NSN 5120002772694, part number 41W1176-70 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4dsp llc
CAGE Code: 31UJ9 |
184th air refueling wing
CAGE Code: 3EP27 |
|
3h products co
CAGE Code: 0CJ60 |
3gen corporation
CAGE Code: 3SPS3 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3m quante ag telekommunikation
CAGE Code: D2771 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
3m company health care mfg
CAGE Code: 04515 |
|
12 volt shop
CAGE Code: Z0JM2 |
21st century electronics inc
CAGE Code: 60092 |
|
5dt inc
CAGE Code: 3BPF1 |
3 d mfg inc
CAGE Code: 66484 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
31 mile equipment co
CAGE Code: 07PE3 |
|
3m unitek corporation
CAGE Code: 90444 |
| Part Number : 41W1176-70 | Manufacturer : General Stores Supply Office | ||
| NSN Number : 5120-00-277-2694 (5120002772694) | |||
| Item Name : Wrench Open End | CAGE Code : 95683 | ||
| NIIN : 002772694 | |||
| FSC CODE : 5120 Hand Tools Nonedged Nonpowered | |||
Thank you for taking an interest in part number 41W1176-70, that of which is listed with the description Wrench Open End; Manufactured by General Stores Supply Office and listed alongside the NSN 5120002772694, part number 41W1176-70 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | FORGED STEEL |
| MATT | MATERIAL | STEEL OVERALL |
| AJAU | LARGE END HEAD THICKNESS | 0.531 INCHES MAXIMUM |
| CWGT | LARGE END HEAD ANGLE | 15.0 DEGREES NOMINAL |
| CRWY | WRENCHING SURFACE SHAPE | OVAL BOTH ENDS INTERNAL |
| SFTT | SURFACE TREATMENT | CHROMIUM OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1 CLASS |
| CTHK | SMALL END HEAD ANGLE | 15.0 DEGREES NOMINAL |
| AJAV | SMALL END HEAD THICKNESS | 0.500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 11.750 INCHES MINIMUM |
| AJBR | WRENCHING SURFACE SIZE | 1.125 INCHES NOMINAL FIRST END 1.250 INCHES NOMINAL SECOND END |
| ZZZK | SPECIFICATION/STANDARD DATA | 05047-ASME B107.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
