Part Number : 1100-5236 | Manufacturer : Genisco Technology Corporation | ||
NSN : 6620-01-148-7914 (6620011487914) | |||
Item Name : Probe | CAGE Code : 96682 | ||
NIIN : 01-148-7914 (011487914) | |||
FSC Code : 6620 Engine Instruments | |||
FSG Code : 66 Instruments and Laboratory Equipment | |||
INC Code : 77777 | |||
NCB Code : 01 | Country : USA | ||
Alternate P/N: 11005236 |
Thank you for taking an interest in part number 1100-5236, that of which is listed with the description Probe; Manufactured by Genisco Technology Corporation and listed alongside the NSN 6620011487914, part number 1100-5236 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 1100-5236 | Manufacturer : Genisco Technology Corporation | ||
NSN Number : 6620-01-148-7914 (6620011487914) | |||
Item Name : Probe | CAGE Code : 96682 | ||
NIIN : 011487914 | |||
FSC CODE : 6620 Engine Instruments |
Thank you for taking an interest in part number 1100-5236, that of which is listed with the description Probe; Manufactured by Genisco Technology Corporation and listed alongside the NSN 6620011487914, part number 1100-5236 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
MRC | Decoded Requirement | Clear Text Reply |
TEXT | General Characteristics Item Description | MATERIAL 1/2 HARD BRASS; FINISH FLAT BLACK PAINT; 0.625 IN. LG; 0.250 IN. W; 0.062 IN. THK; 1 HOLE 0.140 IN. DIA,CENTER OF HOLE LOCATED 0.125 IN. FROM END; 1 END 0.062 IN. BY 45 DEG CHAMFER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote