| Part Number : 299-0070 | Manufacturer : Gkn Aerospace Inc | ||
| NSN : 2520-01-474-3901 (2520014743901) | |||
| Item Name : Shaft Axle Automotive | CAGE Code : 62826 | ||
| NIIN : 01-474-3901 (014743901) | |||
| FSC Code : 2520 Vehicular Power Transmission Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10852 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 2990070 | |||
Thank you for taking an interest in part number 299-0070, that of which is listed with the description Shaft Axle Automotive; Manufactured by Gkn Aerospace Inc and listed alongside the NSN 2520014743901, part number 299-0070 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
1 nci j bkm mrk k ligi
CAGE Code: T0790 |
5dt inc
CAGE Code: 3BPF1 |
|
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
10zig technology inc
CAGE Code: 49E04 |
|
2h energy
CAGE Code: F1797 |
3ps inc
CAGE Code: 1MHK2 |
|
3m singapore pte ltd
CAGE Code: QA095 |
3m norge a s
CAGE Code: N0447 |
|
2415779 ontario inc
CAGE Code: L09L7 |
4 r electro systems
CAGE Code: 1T600 |
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
4 cs electronic packaging inc
CAGE Code: 60744 |
|
4m sigma corporation
CAGE Code: 0BC31 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
3d robotics llc
CAGE Code: 64TY6 |
| Part Number : 299-0070 | Manufacturer : Gkn Aerospace Inc | ||
| NSN Number : 2520-01-474-3901 (2520014743901) | |||
| Item Name : Shaft Axle Automotive | CAGE Code : 62826 | ||
| NIIN : 014743901 | |||
| FSC CODE : 2520 Vehicular Power Transmission Components | |||
Thank you for taking an interest in part number 299-0070, that of which is listed with the description Shaft Axle Automotive; Manufactured by Gkn Aerospace Inc and listed alongside the NSN 2520014743901, part number 299-0070 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-3901 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 014743901 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 456720023102 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AGAV | III END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
