| Part Number : EX4855-3 | Manufacturer : Gkn Aerospace Inc | ||
| NSN : 2520-01-474-4012 (2520014744012) | |||
| Item Name : Shaft Axle Automotive | CAGE Code : 62826 | ||
| NIIN : 01-474-4012 (014744012) | |||
| FSC Code : 2520 Vehicular Power Transmission Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10852 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: EX48553 | |||
Thank you for taking an interest in part number EX4855-3, that of which is listed with the description Shaft Axle Automotive; Manufactured by Gkn Aerospace Inc and listed alongside the NSN 2520014744012, part number EX4855-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
3m company communication markets
CAGE Code: 0VGY3 |
|
1spatial ltd
CAGE Code: U3518 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
17th st photo supply inc
CAGE Code: 1VV61 |
|
1 nation electronics llc
CAGE Code: 1XP36 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
21st century optics inc
CAGE Code: 0TN38 |
4 sure com inc
CAGE Code: 1LDH8 |
|
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
12 volt shop
CAGE Code: Z0JM2 |
|
3m belgium nv
CAGE Code: B2281 |
451676 ontario ltd
CAGE Code: 38552 |
|
4 ld inc
CAGE Code: 0ACW5 |
| Part Number : EX4855-3 | Manufacturer : Gkn Aerospace Inc | ||
| NSN Number : 2520-01-474-4012 (2520014744012) | |||
| Item Name : Shaft Axle Automotive | CAGE Code : 62826 | ||
| NIIN : 014744012 | |||
| FSC CODE : 2520 Vehicular Power Transmission Components | |||
Thank you for taking an interest in part number EX4855-3, that of which is listed with the description Shaft Axle Automotive; Manufactured by Gkn Aerospace Inc and listed alongside the NSN 2520014744012, part number EX4855-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-4012 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 014744012 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10068551 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 25.000 INCHES MINIMUM AND 25.470 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR LEFT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AGAV | III END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
