| Part Number : GA114-3 | Manufacturer : Glenair Inc | ||
| NSN : 5975-01-110-7503 (5975011107503) | |||
| Item Name : Conduit Assembly Nonmetallic Ele | CAGE Code : 06324 | ||
| NIIN : 01-110-7503 (011107503) | |||
| FSC Code : 5975 Electrical Hardware and Supplies | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 19940 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: GA1143 | |||
Thank you for taking an interest in part number GA114-3, that of which is listed with the description Conduit Assembly Nonmetallic Ele; Manufactured by Glenair Inc and listed alongside the NSN 5975011107503, part number GA114-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
184th air refueling wing
CAGE Code: 3EP27 |
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
14 dock drive inc
CAGE Code: 14677 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
526th emxs fabrication
CAGE Code: 69XG4 |
|
5 11 tactical inc
CAGE Code: 3P4J9 |
3m health care service center
CAGE Code: 0UTW7 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
1 nation technology corp
CAGE Code: 08DH5 |
|
20 10 products inc
CAGE Code: 09KC9 |
3m norge a s
CAGE Code: N0447 |
|
17 machinery llc
CAGE Code: 3FEG7 |
| Part Number : GA114-3 | Manufacturer : Glenair Inc | ||
| NSN Number : 5975-01-110-7503 (5975011107503) | |||
| Item Name : Conduit Assembly Nonmetallic Ele | CAGE Code : 06324 | ||
| NIIN : 011107503 | |||
| FSC CODE : 5975 Electrical Hardware and Supplies | |||
Thank you for taking an interest in part number GA114-3, that of which is listed with the description Conduit Assembly Nonmetallic Ele; Manufactured by Glenair Inc and listed alongside the NSN 5975011107503, part number GA114-3 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-110-7503 Item PartTypeName: CONDUIT ASSEMBLY,NONMETALLIC,ELE | 5975 | 011107503 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C8922-19 | 2 | 9 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABEZ | GRIPPING ACCOMMODATION TYPE | ROUND KNURLED BOTH ENDS |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ADAR | BODY OUTSIDE DIAMETER | 0.660 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.450 INCHES MINIMUM |
| CQTX | TERMINAL END TYPE | ELBOW W/COUPLING NUT 1ST END AND PLAIN FERRULE 1ST END |
| CQTX | TERMINAL END TYPE | PLAIN FERRULE W/COUPLING NUT 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 64.000 INCHES NOMINAL WORKING |
| CSJH | TERMINAL END DEFLECTION ANGLE | 45.0 DEGREES NOMINAL 1ST END |
| FLEX | FLEXIBILITY | FLEXIBLE |
| MATT | MATERIAL | ALUMINUM COMPLETE END FITTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
