| Part Number : 5220-5 | Manufacturer : Goodrich Aerospace Canada Ltd | ||
| NSN : 5310-00-080-7216 (5310000807216) | |||
| Item Name : Nut Plain Round | CAGE Code : 02121 | ||
| NIIN : 00-080-7216 (000807216) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 52205 | |||
Thank you for taking an interest in part number 5220-5, that of which is listed with the description Nut Plain Round; Manufactured by Goodrich Aerospace Canada Ltd and listed alongside the NSN 5310000807216, part number 5220-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 5220-5 | Manufacturer : Goodrich Aerospace Canada Ltd | ||
| NSN Number : 5310-00-080-7216 (5310000807216) | |||
| Item Name : Nut Plain Round | CAGE Code : 02121 | ||
| NIIN : 000807216 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 5220-5, that of which is listed with the description Nut Plain Round; Manufactured by Goodrich Aerospace Canada Ltd and listed alongside the NSN 5310000807216, part number 5220-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-080-7216 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 000807216 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5220-5 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 4 |
| BZRR | THREAD SERIES | UN |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | 2.875 INCHES |
| CRSQ | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM NUT AND 90.5 DEGREES MAXIMUM NUT |
| FEAT | SPECIAL FEATURES | 4 DRILLED HOLES ON 45 DEG ANGLE 90 DEG APART ON TOP SURFACE |
| MATT | MATERIAL | ALUMINUM ALLOY 2014 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-266 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
