| Part Number : 85021 | Manufacturer : Goodrich Corporation | ||
| NSN : 3110-00-690-1864 (3110006901864) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 17576 | ||
| NIIN : 00-690-1864 (006901864) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 85021, that of which is listed with the description Bearing Roller Rod End; Manufactured by Goodrich Corporation and listed alongside the NSN 3110006901864, part number 85021 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 85021 | Manufacturer : Goodrich Corporation | ||
| NSN Number : 3110-00-690-1864 (3110006901864) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 17576 | ||
| NIIN : 006901864 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 85021, that of which is listed with the description Bearing Roller Rod End; Manufactured by Goodrich Corporation and listed alongside the NSN 3110006901864, part number 85021 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-690-1864 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 006901864 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 85021 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.5000 INCHES NOMINAL |
| AAZF | SHANK STYLE | INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.5800 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.3125 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3400 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 0.8100 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3400 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| ASDB | WIDTH ACROSS FLATS | 0.5000 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | WITH GREASE FITTING,0.0930 IN. TO 0.0980 IN. W BY 0.0560 IN. TO 0.0610 IN. DEEP SLOT AT SHANK END |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL ROLLER |
| MATT | MATERIAL | STEEL SHAFT |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AGVU | INNER RING WIDTH | 0.5930 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.9100 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| MATT | MATERIAL | STEEL OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
