| Part Number : 2007669-1 | Manufacturer : Goodrich Corporation | ||
| NSN : 5305-01-260-9826 (5305012609826) | |||
| Item Name : Setscrew | CAGE Code : 17576 | ||
| NIIN : 01-260-9826 (012609826) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06672 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 20076691 | |||
Thank you for taking an interest in part number 2007669-1, that of which is listed with the description Setscrew; Manufactured by Goodrich Corporation and listed alongside the NSN 5305012609826, part number 2007669-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2007669-1 | Manufacturer : Goodrich Corporation | ||
| NSN Number : 5305-01-260-9826 (5305012609826) | |||
| Item Name : Setscrew | CAGE Code : 17576 | ||
| NIIN : 012609826 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 2007669-1, that of which is listed with the description Setscrew; Manufactured by Goodrich Corporation and listed alongside the NSN 5305012609826, part number 2007669-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-260-9826 Item PartTypeName: SETSCREW | 5305 | 012609826 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2007669-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.062 INCHES NOMINAL |
| AAUY | POINT LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABQJ | POINT STYLE | FLAT |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWDK | POINT CHAMFER ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | ITEM IS F-16 LANDING GEAR SPECIFIC |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
