| Part Number : 200011 | Manufacturer : Grove Us Llc | ||
| NSN : 3040-01-169-7321 (3040011697321) | |||
| Item Name : Shaft Shouldered | CAGE Code : 12361 | ||
| NIIN : 01-169-7321 (011697321) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 22914 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 200011, that of which is listed with the description Shaft Shouldered; Manufactured by Grove Us Llc and listed alongside the NSN 3040011697321, part number 200011 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 200011 | Manufacturer : Grove Us Llc | ||
| NSN Number : 3040-01-169-7321 (3040011697321) | |||
| Item Name : Shaft Shouldered | CAGE Code : 12361 | ||
| NIIN : 011697321 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 200011, that of which is listed with the description Shaft Shouldered; Manufactured by Grove Us Llc and listed alongside the NSN 3040011697321, part number 200011 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-169-7321 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 011697321 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6-810-002037 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY |
| ABHP | OVERALL LENGTH | 7.398 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 3810-01-144-4885 |
| AMDL | FIRST END DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 1.875 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.9670 INCHES MINIMUM AND 1.9680 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.9685 INCHES MINIMUM AND 1.9695 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 1.9160 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.3125 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.906 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.7590 INCHES MINIMUM AND 1.7670 INCHES MAXIMUM |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.406 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| BDSQ | FIRST END SPLINE QUANTITY | 23 |
| CSPY | LARGEST STEP DIAMETER | 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | FIRST END HAS TWO INTERNAL THD HOLES,0.750 IN. THD LG,LOCATED ON A 1.000 IN. BOLT CIR DIA;SECOND END THDS ARE INDENTED;SECOND END PARTIAL BORE,0.406 IN. DP,0.911 IN. DIA |
| MATT | MATERIAL | STEEL COMP 4140 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
