| Part Number : VBP630-3-12 | Manufacturer : H C Merchandisers Inc | ||
| NSN : 5306-00-193-0862 (5306001930862) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 53037 | ||
| NIIN : 00-193-0862 (001930862) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06666 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: VBP630312 | |||
Thank you for taking an interest in part number VBP630-3-12, that of which is listed with the description Bolt Internal Wrenching; Manufactured by H C Merchandisers Inc and listed alongside the NSN 5306001930862, part number VBP630-3-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : VBP630-3-12 | Manufacturer : H C Merchandisers Inc | ||
| NSN Number : 5306-00-193-0862 (5306001930862) | |||
| Item Name : Bolt Internal Wrenching | CAGE Code : 53037 | ||
| NIIN : 001930862 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number VBP630-3-12, that of which is listed with the description Bolt Internal Wrenching; Manufactured by H C Merchandisers Inc and listed alongside the NSN 5306001930862, part number VBP630-3-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-193-0862 Item PartTypeName: BOLT,INTERNAL WRENCHING | 5306 | 001930862 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VBP630-3-12 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.125 INCHES MINIMUM AND 1.165 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.311 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.028 INCHES MINIMUM FIRST HOLE AND 1.088 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES SIDES OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP 630 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
